Cold Formed Palisade Fencing Products

Standard panels

•  30x30x2mm cold formed panels 19 pailings with a gap of 110mm

•  40x40x2mm cold formed panels 16 pailings with a gap of 125mm

• The thickness of the material of the standard panel is 2mm

Panels can be manufactured to be narrower in width than a standard 3.0m panel.

ECONO Panels

•  30x30x2mm cold formed panels 19 pailings with a gap of 110mm

•  40x40x2mm cold formed panels 16 pailings with a gap of 125mm

• The thickness of the material of the ECONO panel is 1.6mm

Panels can be manufactured to be narrower in width than a standard 3.0m panel.

PAILINGS

Pailings are available in 2 angle sizes:  40 x 40 and 30 x 30

•   The thickness of the standard pailings is 2mm.

•   The ECONO pailings thickness is 1.6mm.

•   Pailings come standard as a 7-spike or 3-spike, with a shallow tail at the bottom.

•   Pailings range from 300mm – 3 000mm.

•   The pailings are HOT ROLLED steel rolled in a COLD FORM process.

POSTS

• Posts are capped with either a square dome cap or a pyramid cap as requested.

• The posts are manufactured using a 76 x76 square tube.

•   To determine the amount of posts needed to go with your panels, add one more post to the amount of panels ordered.

•   Posts can be supplied uncoated or hot dipped galvanized.

•   Standard posts are supplied in lengths of 2.4 m or 3m.

GATES

•   Pedestrian gates can be built into the main gate or separate. 

•   The gaps between the pailings on a 4x 40 pailing gate are 125mm and on a 30 x 30 pailing gate are 105mm.

•   3,5m – 4,5m gates are wide enough for a car  and 4,5m – 8,5m gates are wide enough for a truck.

•  On Gates wider than 4m we use a 100 x 50 rectangular tube as the frame. On smaller gates, we use 76 x 38 mm rectangular tube as the frame.

•  All sliding gates are manufactured with wheel kits and guide wheels.